Overview of BELCOAT®
Overview of BELCOAT®
Lineup of BELCOAT® by AIP®
| Name | Color | Film | Oxidation (℃) |
Friction Coefficient | Thickness (μm) |
Typical Applications |
|---|---|---|---|---|---|---|
| BELCOAT G |
|
TiN | 600 | 0.4 | 1-4 | General wear resistance, wet machining |
| BELCOAT R1 |
|
TiCN (with topcoat) |
400 | 0.4 | 2-4 | General wear resistance, drilling |
| BELCOAT R2 |
|
TiCN (without topcoat) |
400 | 0.4 | 2-4 | General wear resistance, drilling |
| BELCOAT V |
|
TiAlN | 800 | 0.5 | 1-4 | General dry machining, inserts |
| BELCOAT VS |
|
AlTiN | 900 | 0.5 | 1-4 | High speed dry machining |
| BELCOAT SG |
|
CrN | 700 | 0.4 | 1-5 | Mold and Dies, Cu machining, tribological components |
| BELCOAT SS/S |
|
Si added TiCrAIN bilayer | 1,100 | 0.5 | 5-10 | Cold stamping mold |
| BELCOAT SS/HF |
|
Si added TiCrAIN bilayer | 1,100 | 0.5 | 15-20 | Hot forging mold |
| BELCOAT SD |
|
TiCrAlN | 1,000 | 0.4 | 1-4 | General machine substitute to TiAIN |
| BELCOAT SDG |
 |
TICrAISiN | 1,100 | 0.5 | 1-4 | Semi-dry to dry machining (mainly end mills) |
| BELCOAT SDG/H |
|
Si added TiCrAIN bilayer | 1,100 | 0.5 | 1-4 | Semi-dry to dry machining (mainly end mills) |
| BELCOAT SDG/MR |
|
Rare earth added TiCrAIN multilayer | 1,200 | 0.5 | 1-4 | High speed dry machining of hardened die steel, Ti (dry), inconel, Waspaloy |
| BELCOAT TI1 |
 |
Modified AITiN multilayer | 600 | 0.4 | 1-4 | Ti machining (wet to dry) |
| BELCOAT VS/MR |
|
AITiN multilayer | 1,000 | 0.5 | 1-4 | Drilling of carbon steel and alloy steel |
DLC Lineup of BELCOAT® by UBMS®
| Name | Type | Coefficient of Friction | Thickness (μm) |
Features | Applications |
|---|---|---|---|---|---|
| BELCOAT B |
Standard | 0.1-0.15 | 0.5-5 | Balance of Wear Resistance, Lubricity and Adhesion. | Common Mechanical Components |
| BELCOAT HB |
High Hardness | 0.1-0.2 | 1-5 | Focused on Wear Resistance. | Automotive Component Stamping Mold |
| BELCOAT UB |
Ultra High Hardness | 0.1-0.2 | 1-4 | Focused on Wear Resistance under High Pressure. | For Automotive Racing use and Cutting Tools |
| BELCOAT NB |
Nano-Multi layer | 0.1-0.15 | 1-10 | Balance of Wear Resistance and Lubricity, toughness for shock resistance. | Bearings, Punching Dies |
| BELCOAT MB |
Metal Doped | 0.1-0.25 | 1-10 | Property changes by Metal Doping, relief of film stress. | Components, plastic injection molds. |
*Friction coefficient on iron without lubricant
